This article outlines the basic configuration that needs to be setup in a fresh installation of LogiSense Billing. Following this guide you will be able to configure the system to the point where you can:
...
1 - Configure Countries and States/Provinces
|
|---|
2 - Configure Owner Settings
|
|---|
Password Policy: Setup→ Users & Accounts → Owners → Password Policy
Optional: system defaults are provided.
...
Branding: Setup→ Users & Accounts → Owners → Branding
Optional: branding settings change the logos displayed within the LogiSense Billing Application.
...
Automatic Naming: Setup→ Users & Accounts → Owners → Automatic Naming
Optional: Automatic naming schemes allows you to define Invoice numbers and/or credit note numbers.
...
Locales: Setup→ Users & Accounts → Owners → Locales
Optional: Locales allow you to define translations for product names in multiple languages. Locales are attached to invoice templates so that the translations are presented on the invoice.
...
Payment Types: Setup→ Users & Accounts → Owners → Payment Types
Optional: Payment types are the methods that an account is permitted to use to make payments (credit cards, ACH, etc.). The payment methods that a payment gateway supports will be automatically populated when the gateway is configured in LogiSense Billing, you do not need to manually add them.
...
Payment Gateways: Setup→ Users & Accounts → Owners → Payment Gateways
Optional: Payment Gateways are used to process manual and automatic payments for the payment types that the gateway supports (credit cards, ACH).
...
SMTP Settings: Setup → Extensibility → SMTP Settings
Optional: SMTP settings are used to send emails to users of the system as well as account contacts. If SMTP Settings are not configured new system users will be unable receive the email that allows them to setup their password. This step does not need to be performed initially but must be performed before system users are setup.
...
Role Groups: Setup → Users & Accounts → Users → Role Groups
Optional: Role Groups allow you to define specific screen permissions that can be configured on roles in the LogiSense Billing application. Roles are then assigned to users to determine what the user can see and do in the system.
...
Roles: Setup → Users & Accounts → Users → Roles
Optional: Roles are assigned one or more role groups to determine the permissions that a role is granted. Once roles are set up they can be assigned to users in order to impart the needed permissions to that user.
...
Users: Setup → Users & Accounts → Users → Users
Optional: Users can log into the LogiSense billing system and access screens/features of the system based on the role they are configured with
...
Account Types: Setup → Users & Accounts → Accounts → Account Types Required: Account types are used to classify accounts (partner, enterprise, etc.). An account type is required to create accounts. |
|---|
Account Status Types: Setup → Users & Accounts → Accounts → Account Status Types Required: Account status types allow you to define what statuses an account can be in (Pre-Active, Active, Suspended, etc.). At least one Account Status Type is required to create accounts. |
|---|
Contact Types: Setup → Users & Accounts → Accounts → Contact Types
Optional: Contact types are setup in order to configure certain types of contacts on accounts (a billing contact, administrative contact, site contact, etc.). Contact types contain contact points which are configured to store contact related data (email addresses, physical addresses, phone numbers, text, etc.).
...
Currency Exchange: Setup → Finance → Currency Exchange Required: Currency Exchanges define currency exchange rates when you have more than once currency configured. At least one currency exchange must be setup for bill runs to know what exchange rates to use when billing. |
|---|
...
Email Template: Setup → Extensibility → Templates → Email
Optional: Email templates are used to notify account contacts and users when system events such as dunning, billing and invoicing activities occur (e.g. an email sent when payment is overdue).
...
Invoice Template: Setup → Extensibility → Templates → Templates
Optional: Invoice templates are only required if you will be generating invoices and sending them to account contacts (a sample template is included with a new installation, so this configuration does not need to be performed immediately). From the invoice template screen you can also create Credit Note templates.
...
Invoice Delivery: Setup → Finance → Invoicing Required: Invoice delivery defines how invoices are sent (via email or offline) and which invoice template to use. Invoice delivery settings are attached to bill groups to define how to invoice the accounts under the bill group (e.g. email deliver invoices to the ‘corporate’ bill group and use the invoice template ‘corporate’). |
|---|
8 - Configure Billing SettingsBill Groups: Setup → Finance → Billing → Bill Group Required: Bill Groups define how accounts are billed. In order to setup an account in the system you must have a bill group to assign to the account. |
|---|
Bill Runs: Setup → Finance → Billing → Bill Runs
Optional: Bill runs are configured to bill accounts. They can also trigger invoicing and payment collection actions and execution of contract and accounts receivable terms (dunning rules). Bill runs can be configured at a later time if desired (e.g. when you have created an account and are ready to bill it).
...
GL Codes: Setup → Finance → Billing → GL Codes
Optional: GL Codes can be associated with services (charges) as well as tax rates. If you do not use GL Codes you can skip this configuration step.
...
9 - Configure Usage Billing Elements (Optional)
Optional: If you are not charging for or providing usage with your offering and only billing using a subscription model you can skip this section.
...
Service Types: Setup → Product Catalog → Services → Service Types Required: Service types provide a means to categorize services within the system. Services cannot be configured without first configuring service types. |
|---|
Service Status: Setup → Product Catalog → Services → Service Status Required: Service statuses are used to setup the service states you require, for instance 'Preactive', 'Active', 'Suspended'. Service Statuses are required in order to configure packages. |
|---|
Service Transitions: Setup → Product Catalog → Services → Service Transitions
Optional: Service transitions are setup to permit charges to be applied when a service is switched from one status to another (e.g. an activation fee). Service transitions only need to be setup if you wish to charge fees when a service transitions from one status to another.
...
Service: Setup → Product Catalog → Service Required: Services are chargeable elements in the system (for instance an access service, device, license, etc.). Services represent the individual line items that when bundled together as a package become the offering that is sold and added to accounts. Services are required to setup packages. |
|---|
Package Status: Setup → Product Catalog → Packages → Package Status Required: Service statuses are used to setup the service states you require, for instance 'Active', 'Suspended'. These statuses define if a package is billable or not, based on how you configure them. A package status must be specified in order to add a package to an account. |
|---|
Package Status: Setup → Product Catalog → Packages → Package Status Required: Service statuses are used to setup the service states you require, for instance 'Active', 'Suspended'. These statuses define if a package is billable or not, based on how you configure them. A package status must be specified in order to add a package to an account. |
|---|
Package: Setup → Product Catalog → Package Required: Packages are containers for services which have services associated with them (e.g. 'Monthly Service A' and 'Monthly Service B'). Services by themselves cannot be added to an account directly, they are always contained in a package. |
|---|
Package Frequency: Setup → Product Catalog → Package → Required: Package frequencies allow you to configure packages with as many billing frequencies as you require (monthly, quarterly, annually, etc.). Service pricing and other charges are also defined at the package frequency level. |
|---|
...
Payment Terms: Setup → Finance → Dunning Process → Payment Terms Required: Payment terms allow you to define how invoice due dates are set and are required in order to setup accounts receivable terms (AR terms). |
|---|
Dunning Rules: Setup → Finance → Dunning Process → Dunning Rules
Optional: Dunning rules allow you to define the events which are triggered when account invoices become overdue (send emails, apply fees, suspend an account). Dunning rules execute during bill runs, but only if the 'Run Dunning Process' setting is enabled on the bill run.
...
AR Terms: Setup → Finance → Dunning Process → AR Terms Required: Accounts receivable terms determine when payment is due (using configured payment terms) and what actions are executed when payment has not been received (using dunning rules). AR Terms are required in order to create accounts. |
|---|
...
New Account: Account → New Required: Accounts typically represent customers or partners. Accounts contain contacts, packages, invoices and other account/billing specific settings and information. An account will require at least one contact if you wish to deliver invoices. By default the system will require that you add a billing contact to an account (but this requirement can be disabled). |
|---|
Creating Child Accounts (Optional): Account → Account Tree Icon → 
account
Optional: Child accounts are created under a parent account and by default will be configured to roll up invoice subscription charges and usage charges to their parent account (although a child account can be setup to receive its own invoice if desired).
...
Add Package: Account → Profile → Packages → Required: Packages are products/offerings that are added to accounts and billed. When you add a package to an account it will indicate when it will next be billed by showing a ‘Next Bill Date’ value. |
|---|
...
Bill Account: Account → Profile → Packages → Required: On the packages screen there is an option to bill packages (the |
|---|
...