Page Comparison

Overview

The GeoTree is a structured tree comprised of nodes which can represent locations (e.g. Everywhere/South America/Brazil) or another location specific entity such as a carrier/service area (e.g. Everywhere/North America/Canada/Zone 1). At each node patterns can be configured. When the GeoTree is used by the rating engine the usage record's destination value (terminating number, IP address, etc.) is matched against the patterns defined in the tree in order to map the usage to a location. When a pattern match occurs the rate that is applied is determined by checking the 'Location' value on the rates that exist in a rate plan. If a rate with a matching location cannot be found a usage exception will occur.

...

...

This tab displays the nodes that exist beneath the current node you are viewing. From here you can create, edit and delete sub-nodes beneath the currently selected node. See the guides section below for details on how to add/edit/delete nodes in the GeoTree.

...

Adding and Editing GeoTree Patterns

1. Locate and select the node on the left under the GeoTree heading or use the Filter text box to narrow down the list

2. Ensure the Patterns tab is selected

3. Existing patterns configured on the node will be displayed (if any)

4. To add a new pattern, click on the + New button. On the model that loads enter the pattern (Name) and Country the pattern relates to then select Add

5. To edit an existing pattern, click on the  button and modify the pattern (Name) and Country as desired, then select Update

6. Click Save to commit your changes

...

Adding GeoTree Nodes

1. Select the node you wish to add the new node beneath on the left under the GeoTree heading

2. Load the Nodes tab

3. Click the + New button

4. On the model that loads give the node a Name that is appropriate for its location in the tree

5. Click Add to add the new node

6. Repeat the three steps above to add additional sub-nodes at the current node location if desired

7. When you have finished adding sub-nodes to the current node click Save to create the nodes

...

Deleting GeoTree Nodes

1. Select the node above the node you wish to delete on the left under the GeoTree heading

2. Load the Nodes tab

3. Next to the node you wish to delete click on the  button

4. Click on the  button which appears and the node will be tagged for deletion

5. Repeat the two steps above to mark additional nodes for deletion if desired

6. When you are finished click Save to commit your changes